Page d’accueil

Navien NPE-240S2 – Condensing Tankless Water Heater – 199,000 BTU

The Navien NPE-240S2 is a premium condensing tankless water heater built to deliver reliable, high-capacity hot water for residential or commercial applications. With a powerful input range of 13,300 to 199,900 BTU/h and an impressive 0.96 UEF, it’s ENERGY STAR® certified for efficiency and performance. This unit delivers up to 11.2 gallons per minute at a 35°F temperature rise and operates at flow rates as low as 0.5 GPM, making it ideal for both large-volume and low-demand applications.

Designed for indoor or outdoor wall-hung installation, the NPE-240S2 features ultra condensing technology and durable dual stainless steel heat exchangers. It includes the intuitive EZNav™ control panel with a built-in HotButton™ interface and is compatible with NaviLink™ for remote access. The unit is field convertible between natural gas and propane and supports cascading of up to 12 units for expanded demand. With ultra-low NOx emissions and 1/2″ gas line compatibility up to 24 feet, it offers maximum flexibility for a wide range of installations.

Features

• 199,900 BTU/h input with 0.96 UEF efficiency
• Up to 11.2 GPM at 35°F temperature rise
• Dual stainless steel heat exchangers
• Ultra condensing performance
• Low NOx emissions (20 ppm)
• Minimum flow rate: 0.5 GPM
• Indoor or outdoor wall-hung installation
• Field convertible gas system (NG or LP)
• EZNav™ control panel with HotButton™ interface
• Cascading capable with up to 12 units
• Common venting capable
• 1/2″ gas pipe compatible up to 24 ft
• 2″ venting up to 60 ft, 3″ venting up to 150 ft
• 3/4″ NPT connections for gas, hot, and cold water
• 120V, 60Hz, single-phase power supply
• CSA Listed, AHRI Certified, ENERGY STAR®, NSF Listed

Applications

• Residential homes with high simultaneous water demand
• Light commercial hot water systems
• Indoor or outdoor installations needing compact, wall-mounted design
• Projects requiring gas and venting flexibility
• Multi-unit cascade-ready setups

^PNAV000037

Navien NCB-240/130H – Condensing Combi-Boiler – 199,000 BTU DHW / 130,000 BTU HTG

The Navien NCB-240/130H is a high-efficiency, 95% AFUE condensing combi-boiler that delivers both space heating and domestic hot water in a single wall-hung unit. Designed for performance and convenience, it features a maximum heating input of 130,000 BTU/hr and a DHW input of up to 199,000 BTU/hr. The unit supports both natural gas and propane, with field conversion included, and offers flexible venting options using 2″ or 3″ PVC, CPVC, polypropylene, or stainless steel.

The NCB-240/130H includes dual stainless steel heat exchangers, integrated smart controls with an LCD display, and built-in support for three heating zones. With advanced turndown ratios and Energy Star certification, it’s engineered to optimize energy use while maintaining consistent comfort in residential heating applications.

Features:

• 95% AFUE efficiency rating
• 130,000 BTU/hr heating input
• 199,000 BTU/hr DHW input
• Dual stainless steel heat exchangers
• 10:1 heating turndown ratio
• 15:1 domestic hot water turndown ratio
• Smart controls with LCD display and setup wizard
• Integrated 3-zone controller for zone valves or circulators
• Field convertible from natural gas to propane (kit included)
• Compact wall-hung design
• Energy Star certified
• Built-in freeze protection and advanced safety controls
• Supports cascading with up to 15 NPE units

Applications:

• Whole-home heating and on-demand hot water
• Residential homes using natural gas or propane
• Indoor wall-mounted installations
• Projects requiring high-efficiency boiler systems
• Smart home setups using Navien controls
• Systems needing multi-zone heating integration

Aim high with Navien…

High efficiency, High output, High performance, all in one compact combi

• Highest DHW maximum BTU’s in residential combi-boilers…up to 210,000 per hour
• Highest DHW flow rate @ 70°F rise…up to 5.4 GPM
• Highest number of BTU sizes for the North American residential combi-boiler market
• Highest residential combi DHW TDR…15:1 for all models
• Highest residential combi heating TDR… up to 11:1
• Highest number of built-in zone controls for valves or pumps… up to three
• Highest full lineup 2″ PVC venting lengths… up to 65 feet
• Highest number of cascade capable units with NPE tankless water heaters… up to 15
• High altitude certification… up to 10,100 feet (NG or LP)
• Lowest minimum fire BTU for residential combi-boilers… as low as 10,700

New Navien NCB-H…the complete combi package and no comprimises

Navien’s innovation and technological advancements have done it again. The new NCB-H is taking combi performance to the highest levels. As the competition tries to get closer, Navien ingenuity keeps advancing their lead.

COMPARE these advantages and see why NCB-H combis are the right fit for small and large homes

Dual stainless steel heat exchangers for heatingDurable stainless steel heat exchangers resist corrosion, resulting in longer life and improved heat recovery from flue gases for superior efficiency.	Up to 5.4 GPM @ 70°F temperature rise for DHWSeparate stainless steel flat plate heat exchanger for DHW creates the lightest flow rates for any combi-boiler in the industry.	Dual Venturi and field gas convertibilityDual Venturi system creates better combustion control and turndown ratio. Orifice conversion kit for easy field gas convertibility from NG to LP is included with every NCB-H Series combi-boiler.
Easy access to DHW module and valvesAll components of DHW module including water feed valve, flow adjustment valve, mixing valve and 3-way valve are right behind circuit board for easy serviceability.	Low noise levelsInstallations in or near media rooms, recreation rooms or any living areas of the house are possible with the quiet running NCB-H combi-boilers.	TDR 15:1 for DHW and up to 11:1 for heatingThe sophisticated gas flow control system provides a high turndown ratio, reducing energy waste and excessive boiler cycling and enhances temperature control for DHW.

Dual Stainless Steel Heat Exchanger Designed for exceptional heating performance and longevity Heating up to 150,000 BTUs per hour

Built-in DHW module now with
higher performance
Navien’s NCB-H generates enough hot water to run up to 3 showers and a dishwasher at the same time.

Expanded DHW Capability

For increased domestic hot water flow demand, the NCB-H can be cascaded and common vented with up to 15 NPE tankless water heaters

^PNAV000036

Navien NPE-240A2 – Condensing Tankless Water Heater – 199,000 BTU

The Navien NPE-240A2 is a high-capacity, high-efficiency condensing tankless water heater engineered for residential and light commercial applications. With an input range of 13,300 to 199,900 BTU per hour and a Uniform Energy Factor of 0.95, it delivers up to 11.2 gallons per minute at a 35°F temperature rise. Its compact, wall-hung design allows for flexible indoor or outdoor installation and supports 2″ or 3″ venting for long runs, making it ideal for homes or businesses requiring reliable and continuous hot water.

This model features Navien’s patented ComfortFlow® system with a built-in recirculation pump and buffer tank to eliminate temperature fluctuations and minimize hot water wait time. Dual stainless steel heat exchangers enhance durability, while the EZNav™ control panel simplifies setup and operation. The NPE-240A2 supports cascading with up to 32 units and common venting with up to 12, and is field convertible for natural gas or propane use. With ultra-low NOx emissions and advanced safety features, it delivers efficient performance without sacrificing reliability.

Features

• 199,900 BTU/h input with 0.95 UEF
• Flow rate: up to 11.2 GPM at 35°F rise
• Dual stainless steel heat exchangers
• Built-in ComfortFlow® recirculation pump and buffer tank
• Field convertible gas system (NG or LP, kit included)
• Low NOx emissions (20 ppm)
• Indoor or outdoor wall-hung installation
• EZNav™ multi-line control panel with built-in HotButton™
• Cascading capable: up to 32 units
• Common venting capable: up to 12 units
• 1/2″ gas line compatible up to 24 feet
• 2″ venting up to 75 feet, 3″ venting up to 150 feet
• 3/4″ NPT gas and water connections
• Electronic ignition and VID safety feature

Applications

• Residential homes with high hot water demand
• Light commercial facilities needing continuous hot water
• Retrofits or upgrades to high-efficiency systems
• Indoor or outdoor wall-mounted installations
• Cascade setups in multi-unit buildings or large households

Navien NPE-A2 simply a smarter hot water system for today’s life styles

Navien…the proven leader in condensing tankless, makes it even easier to install and set up with the new NPE-A2 series

Built-in recirculation system Navien’s patented ComfortFlow® system is the first to include a buffer tank, recirculation pump and fine-tuned controls into a tankless water heater, resolving the cold-water sandwich effect* and issues of minimal flow rates commonly found in other tankless water heaters. * The “cold-water sandwich effect” is the undesired introduction of cold water into the hot water supply line on occasions of frequent on/off operations. (Measure Guideline : Transitioning to a Tankless Water heater, DOE, Sept.2012).

The built-in recirculation pump allows the NPE-A2 to recirculate water either through an external recirc line or through existing supply lines while using NaviCirc®, without the need for external pumps or controls.

Multi-line control with built-in intuitive software  Navien’s new backlit EZNav™ control panel uses simple text and icons to make set up, operation status and troubleshooting faster and easier than ever before. Self-diagnostics. Displays temperature and water flow rate. Displays status of cascade operation. Convertible display from °F to °C. User Friendly Interface. Easy setup.

^PNAV000025

Navien NPE-210A2 – Condensing Tankless Water Heater – 180,000 BTU

The Navien NPE-210A2 is a high-efficiency condensing tankless water heater engineered for both residential and commercial applications. With an input capacity of 12,000 to 180,000 BTU per hour and a Uniform Energy Factor of 0.95, it provides dependable hot water while maintaining low energy costs. The unit supports up to 10.1 gallons per minute at a 35°F rise, making it ideal for homes with multiple fixtures or businesses requiring steady hot water. Its compact, wall-hung design supports indoor or outdoor installation, and it is field convertible between natural gas and propane.

Designed with Navien’s ultra condensing technology and dual stainless steel heat exchangers, the NPE-210A2 also includes built-in recirculation via ComfortFlow® technology, minimizing hot water wait times. The unit features an intuitive EZNav™ control panel with built-in HotButton™ functionality, cascading capability for up to 12 common-vented units, and ½” gas line compatibility up to 24 feet. It’s compatible with NaviLink™ for remote control and can support space heating through the optional H2Air Kit.

Features

• 180,000 BTU/h input with 0.95 UEF
• Up to 10.1 GPM at 35°F temperature rise
• Dual stainless steel heat exchangers
• Ultra condensing efficiency
• ComfortFlow® recirculation with built-in buffer tank and pump
• EZNav™ multi-line control panel with HotButton™
• Low NOx emissions (20 ppm)
• Field convertible gas system (NG/LP)
• Indoor or outdoor wall-hung installation
• 1/2″ gas line capable up to 24 feet
• Direct venting: 2″ up to 75 feet, 3″ up to 150 feet
• Cascading and common venting for up to 12 units
• Compatible with NaviLink™ remote control system
• 3/4″ NPT hot, cold, and gas connections

Applications

• Residential homes with high hot water demand
• Light commercial water heating
• Multi-bathroom households or small businesses
• Installations needing gas and venting flexibility
• Cascade-ready systems with optional space heating

Navien NPE-A2 simply a smarter hot water system for today’s life styles

Navien…the proven leader in condensing tankless, makes it even easier to install and set up with the new NPE-A2 series

Built-in recirculation system Navien’s patented ComfortFlow® system is the first to include a buffer tank, recirculation pump and fine-tuned controls into a tankless water heater, resolving the cold-water sandwich effect* and issues of minimal flow rates commonly found in other tankless water heaters. * The “cold-water sandwich effect” is the undesired introduction of cold water into the hot water supply line on occasions of frequent on/off operations. (Measure Guideline : Transitioning to a Tankless Water heater, DOE, Sept.2012).

The built-in recirculation pump allows the NPE-A2 to recirculate water either through an external recirc line or through existing supply lines while using NaviCirc®, without the need for external pumps or controls.

Multi-line control with built-in intuitive software  Navien’s new backlit EZNav™ control panel uses simple text and icons to make set up, operation status and troubleshooting faster and easier than ever before. Self-diagnostics. Displays temperature and water flow rate. Displays status of cascade operation. Convertible display from °F to °C. User Friendly Interface. Easy setup.

^PNAV000020

Navien NPE-180A2 – Condensing Tankless Water Heater – 150,000 BTU

Navien NPE-A2 simply a smarter hot water system for today’s life styles

Navien…the proven leader in condensing tankless, makes it even easier to install and set up with the new NPE-A2 series

Built-in recirculation system Navien’s patented ComfortFlow® system is the first to include a buffer tank, recirculation pump and fine-tuned controls into a tankless water heater, resolving the cold-water sandwich effect* and issues of minimal flow rates commonly found in other tankless water heaters. * The “cold-water sandwich effect” is the undesired introduction of cold water into the hot water supply line on occasions of frequent on/off operations. (Measure Guideline : Transitioning to a Tankless Water heater, DOE, Sept.2012).

The built-in recirculation pump allows the NPE-A2 to recirculate water either through an external recirc line or through existing supply lines while using NaviCirc®, without the need for external pumps or controls.

Multi-line control with built-in intuitive software  Navien’s new backlit EZNav™ control panel uses simple text and icons to make set up, operation status and troubleshooting faster and easier than ever before. Self-diagnostics. Displays temperature and water flow rate. Displays status of cascade operation. Convertible display from °F to °C. User Friendly Interface. Easy setup.

^PNAV000023

Navien NFC-250/200H - Condensing Combi-Boiler - 199,900 BTU DHW / 210,000 BTU HTG

The Navien NFC-250/200H is a high-efficiency condensing combi-boiler that combines space heating and domestic hot water production in a single compact unit. It delivers 95% AFUE efficiency and is Energy Star certified. The unit features a 15:1 turndown ratio for both heating and domestic hot water, ensuring precise temperature control and energy savings. Equipped with a new domestic hot water module with mixing and water adjustment valves, it provides consistent, comfortable hot water. Advanced controls with an intuitive interface and Setup Wizard simplify installation and operation, while built-in powered connections support up to three zone valves or pumps.

This boiler supports flexible venting options with 2" pipe runs up to 65 feet and 3" runs up to 150 feet. Its patented stainless steel fire tube heat exchanger and non-metallic condensate base ensure durability and reliability. The NFC-250/200H is approved for high altitude installations up to 10,100 feet on natural gas and propane, with conversion kits included. It can be common vented with up to seven NPE units or cascaded with up to fifteen units, allowing easy capacity expansion for larger heating demands.

Features

• 95% AFUE efficiency, Energy Star certified
• 15:1 turndown ratio for heating and DHW
• New DHW module with mixing and water adjustment valves
• Advanced controls with Setup Wizard
• Built-in powered connections for 3 zone valves or pumps
• Venting: 2" up to 65 feet, 3" up to 150 feet
• Patented stainless steel fire tube heat exchanger
• Non-metallic condensate base
• High altitude approval up to 10,100 ft (NG and LP) with conversion kits
• Common venting up to 7 NPE units; cascading up to 15 units

Applications

• Residential and light commercial space heating
• Domestic hot water supply for multiple fixtures
• Multi-zone hydronic heating systems
• High altitude installations
• Cascade boiler setups for increased capacity

Related Video: NFC-H Condensing Fire Tube Combi-Boiler

^PZNS665113

Navien NCB-250/150H - Condensing Combi-Boiler - 250,000 BTU DHW / 210,000 BTU HTG

The Navien NCB-250/150H is a 95% AFUE condensing combi-boiler that combines powerful space heating and on-demand domestic hot water in a single wall-hung unit. With a maximum input of 150,000 BTU/hr and a net AHRI rating of 120,000 BTU/hr, this unit delivers efficient performance for larger residential applications. It offers a 11.1:1 turndown ratio for heating and a 15:1 ratio for hot water, providing responsive modulation based on system demand.

The NCB-250/150H is field convertible from natural gas to propane and supports a range of venting materials including PVC, CPVC, polypropylene, and stainless steel. It also features compatibility with Navien’s NaviLink smart home controller for remote access and monitoring.

Features:

• 95% AFUE high-efficiency rating
• 150,000 BTU/hr heating input
• 120,000 BTU/hr net AHRI rating
• 11.1:1 turndown ratio for space heating
• 15:1 turndown ratio for domestic hot water
• Field convertible between natural gas and propane
• Smart controls with NaviLink compatibility
• Energy Star certified
• Compact wall-mounted design
• Compatible with 2" or 3" venting (PVC, CPVC, polypropylene, stainless steel)

Applications:

• Whole-home space heating and domestic hot water
• Medium to large residential homes
• Indoor installations with venting flexibility
• Natural gas or propane systems
• Retrofits and new construction
• Smart home integration with NaviLink controller

Aim high with Navien...

High efficiency, High output, High performance, all in one compact combi

• Highest DHW maximum BTU’s in residential combi-boilers...up to 210,000 per hour
• Highest DHW flow rate @ 70°F rise...up to 5.4 GPM
• Highest number of BTU sizes for the North American residential combi-boiler market
• Highest residential combi DHW TDR...15:1 for all models
• Highest residential combi heating TDR... up to 11:1
• Highest number of built-in zone controls for valves or pumps... up to three
• Highest full lineup 2" PVC venting lengths... up to 65 feet
• Highest number of cascade capable units with NPE tankless water heaters... up to 15
• High altitude certification... up to 10,100 feet (NG or LP)
• Lowest minimum fire BTU for residential combi-boilers... as low as 10,700

New Navien NCB-H...the complete combi package and no comprimises

Navien's innovation and technological advancements have done it again. The new NCB-H is taking combi performance to the highest levels. As the competition tries to get closer, Navien ingenuity keeps advancing their lead.

COMPARE these advantages and see why NCB-H combis are the right fit for small and large homes

Dual Stainless Steel Heat Exchanger Designed for exceptional heating performance and longevity Heating up to 150,000 BTUs per hour

Built-in DHW module now with
higher performance
Navien’s NCB-H generates enough hot water to run up to 3 showers and a dishwasher at the same time.

Expanded DHW Capability

For increased domestic hot water flow demand, the NCB-H can be cascaded and common vented with up to 15 NPE tankless water heaters

^ZCS

Navien NCB-240/110H – Condensing Combi-Boiler – 199,000 BTU DHW / 110,000 BTU HTG

The Navien NCB-240/110H is a 95% AFUE condensing combi-boiler designed to deliver both space heating and domestic hot water in one high-performance, wall-mounted unit. With a maximum heating input of 110,000 BTU/hr and up to 199,000 BTU/hr for DHW, it efficiently meets the demands of larger homes or applications with simultaneous heating and hot water needs.

This combi-boiler operates on natural gas or propane and includes advanced features such as dual stainless steel heat exchangers, a smart control interface, and built-in zone pump and valve terminals. With turndown ratios of 8.5:1 for space heating and 15:1 for hot water, the NCB-240/110H adapts efficiently to fluctuating usage demands, reducing wear and energy waste.

Features:

• 95% AFUE high-efficiency rating
• 110,000 BTU/hr heating input
• Up to 199,000 BTU/hr DHW input
• 8.5:1 turndown ratio for heating
• 15:1 turndown ratio for domestic hot water
• Smart controls with backlit LCD and Setup Wizard
• Dual stainless steel heat exchangers
• Field convertible between natural gas and propane
• Built-in zone pump and zone valve connections
• Compact, wall-hung design with quiet operation
• Supports 2″ or 3″ direct venting

Applications:

• Residential space heating and hot water
• Homes with simultaneous multi-fixture usage
• Natural gas or propane fuel systems
• Installations requiring compact, high-efficiency units
• New construction or retrofit boiler replacements
• Indoor wall-mounted applications with venting flexibility

Aim high with Navien…

High efficiency, High output, High performance, all in one compact combi

• Highest DHW maximum BTU’s in residential combi-boilers…up to 210,000 per hour
• Highest DHW flow rate @ 70°F rise…up to 5.4 GPM
• Highest number of BTU sizes for the North American residential combi-boiler market
• Highest residential combi DHW TDR…15:1 for all models
• Highest residential combi heating TDR… up to 11:1
• Highest number of built-in zone controls for valves or pumps… up to three
• Highest full lineup 2″ PVC venting lengths… up to 65 feet
• Highest number of cascade capable units with NPE tankless water heaters… up to 15
• High altitude certification… up to 10,100 feet (NG or LP)
• Lowest minimum fire BTU for residential combi-boilers… as low as 10,700

New Navien NCB-H…the complete combi package and no comprimises

Navien’s innovation and technological advancements have done it again. The new NCB-H is taking combi performance to the highest levels. As the competition tries to get closer, Navien ingenuity keeps advancing their lead.

COMPARE these advantages and see why NCB-H combis are the right fit for small and large homes

Dual stainless steel heat exchangers for heating Durable stainless steel heat exchangers resist corrosion, resulting in longer life and improved heat recovery from flue gases for superior efficiency.	Up to 5.4 GPM @ 70°F temperature rise for DHW Separate stainless steel flat plate heat exchanger for DHW creates the lightest flow rates for any combi-boiler in the industry.	Dual Venturi and field gas convertibility Dual Venturi system creates better combustion control and turndown ratio. Orifice conversion kit for easy field gas convertibility from NG to LP is included with every NCB-H Series combi-boiler.
Easy access to DHW module and valves All components of DHW module including water feed valve, flow adjustment valve, mixing valve and 3-way valve are right behind circuit board for easy serviceability.	Low noise levels Installations in or near media rooms, recreation rooms or any living areas of the house are possible with the quiet running NCB-H combi-boilers.	TDR 15:1 for DHW and up to 11:1 for heating The sophisticated gas flow control system provides a high turndown ratio, reducing energy waste and excessive boiler cycling and enhances temperature control for DHW.

Dual Stainless Steel Heat Exchanger Designed for exceptional heating performance and longevity Heating up to 150,000 BTUs per hour

Built-in DHW module now with
higher performance
Navien’s NCB-H generates enough hot water to run up to 3 showers and a dishwasher at the same time.

Expanded DHW Capability

For increased domestic hot water flow demand, the NCB-H can be cascaded and common vented with up to 15 NPE tankless water heaters

^ZNS

Navien NCB-190/080H - Condensing Combi-Boiler - 160,000 BTU DHW / 80,000 BTU HTG 

The Navien NCB-190/080H is a high-efficiency condensing combi-boiler that delivers both hydronic space heating and domestic hot water from a single, compact wall-hung unit. With a 95% AFUE rating and up to 80,000 BTU/hr heating input, it provides consistent warmth and efficiency for a wide range of home sizes. The domestic hot water system delivers up to 160,000 BTU/hr with a 15:1 turndown ratio and 4.3 GPM flow rate at a 37°C rise, supporting simultaneous use across multiple fixtures.

Constructed with dual stainless steel heat exchangers for long-term durability and corrosion resistance, the NCB-190/080H is equipped with smart control features, built-in pumps, and field conversion capability between natural gas and propane. It supports cascading and common venting with NPE water heaters, making it an adaptable solution for residential heating and hot water needs.

Features:

• 95% AFUE energy efficiency
• 160,000 BTU/hr DHW input and 80,000 BTU/hr heating input
• Dual stainless steel heat exchangers
• 15:1 DHW turndown ratio
• Smart control with Setup Wizard and backlit LCD
• Built-in zone pumps and zone valve terminals
• Compatible with cascading and common venting setups
• Field convertible for natural gas or propane
• Compact wall-hung design
• Flexible 2" or 3" venting options

Applications:

• Whole-house hydronic space heating
• On-demand domestic hot water
• Homes using natural gas or propane
• New construction or system replacements
• Residences requiring compact, wall-mounted heating solutions
• Installations requiring energy-efficient and low-maintenance operation

Aim high with Navien...

High efficiency, High output, High performance, all in one compact combi

• Highest DHW maximum BTU’s in residential combi-boilers...up to 210,000 per hour
• Highest DHW flow rate @ 70°F rise...up to 5.4 GPM
• Highest number of BTU sizes for the North American residential combi-boiler market
• Highest residential combi DHW TDR...15:1 for all models
• Highest residential combi heating TDR... up to 11:1
• Highest number of built-in zone controls for valves or pumps... up to three
• Highest full lineup 2" PVC venting lengths... up to 65 feet
• Highest number of cascade capable units with NPE tankless water heaters... up to 15
• High altitude certification... up to 10,100 feet (NG or LP)
• Lowest minimum fire BTU for residential combi-boilers... as low as 10,700

New Navien NCB-H...the complete combi package and no comprimises

Navien's innovation and technological advancements have done it again. The new NCB-H is taking combi performance to the highest levels. As the competition tries to get closer, Navien ingenuity keeps advancing their lead.

COMPARE these advantages and see why NCB-H combis are the right fit for small and large homes

Dual Stainless Steel Heat Exchanger Designed for exceptional heating performance and longevity Heating up to 150,000 BTUs per hour

Built-in DHW module now with
higher performance
Navien’s NCB-H generates enough hot water to run up to 3 showers and a dishwasher at the same time.

Expanded DHW Capability

For increased domestic hot water flow demand, the NCB-H can be cascaded and common vented with up to 15 NPE tankless water heaters

^ZNS

R-134A refrigerant packed in a 30 lb disposable cylinder —

R-134A is a single-component HFC used in automotive AC, household appliances, and chillers. Each cylinder is factory-sealed and meets ASHRAE / AHRI purity specifications, ready for direct use by licensed HVAC technicians.

• Factory-filled, certified purity
• Disposable steel cylinder with standard service-port fitting
• Ships fast from US warehouses
• Bulk pricing available — contact us for a quote

Important: R-134A is sold only to EPA Section 608/609 certified technicians where required by law. By purchasing, you confirm you meet all applicable federal, state, and local regulations.